Quick Start Guide

Operating VTO 21
You can add 50 faces at most under one room number.
Select Face Registration. Step 2
The VTO starts recognizing and adding face data. Press to restart.
After the registration is finished, press to confirm, and then press to Step 3
exit.
4.3.4 Issuing Card
In the project mode, select User Registration. Step 1
The Input room number interface is displayed.
Enter the number of the room to which you need to issue access card, and then press Step 2
.
You can issue access card with master card or card issuing password. Step 3
 Issue card with master card
Select Issue Card > Master card, and then swipe the master card.
You can issue master card on the SIP server. See the detailed configuration in the
corresponding manual.
 Issue card with password
Select Issue Card > Password, then enter the card issuing password, and then
press # to confirm.
The default card issuing password is 002236, and you can modify it in the web interface.
See the VTO users' manual.
Swipe the card(s) that need to be authorized. Step 4
After the registration is finished, press to confirm, and then press again Step 5
to exit.