Quick Start Guide

Operating VTO 20
4.2.4 Unlock From VTH
You can tap the unlock button on VTH to unlock the door when VTO and VTH are having phone
call or you are doing monitor.
4.2.5 Unlock From the Management Center
You can unlock the door from the management center when VTO is calling the management
center, VTO and the management center are having phone call, or you are doing monitor from
the management center.
Project Mode 4.3
The project mode is only for professional or admin people, and you can make advanced
configurations to the VTO under this mode, including issuing access card, modifying device IP
address, and adding room number.
4.3.1 Entering Project Mode
On the main interface, enter “ +project password+ ” to enter project mode.
The default project password is 888888, and you can modify it on the VTO or in the VTO web
interface.
In the project mode, you can press or to select menu items; press as
return; press as confirm.
4.3.2 Modifying IP Address
In the project mode, select IP Settings. Step 1
Press numeric keys of 2, 8, 4, and 6 as directional keys to select the item you need to Step 2
modify, and then press to start input. After inputting, press to confirm.
After the modification is finished, press to exit. Step 3
4.3.3 Adding Face Data
Face recognition is available on select models.
In the project mode, select User Registration. Step 1
The Input room number interface is displayed.
Enter the room number for the newly added face, and then press . Step 1