Quick Start Guide

Installation 9
Installing VTO 2.3
VTO installation Figure 2-9
Table 2-2 Item list
No.
Item
No.
Item
1
Wall
2
Mounting box
3
VTO
4
Screw
Cut an opening with the size of the mounting box in the wall. Step 1
Pull the reserved cables through the cable hole in the mounting box. Step 2
Fix the mounting box in the wall with cement or screws. Step 3
Connect the cables to the ports on the VTO rear panel. See "2.2 Connecting Cable." Step 4
Fix the VTO in the mounting box with the screws. Step 5
Put sealant between the VTO, mounting box, and the wall.Step 6