Quick Start Guide

16
3.3.3.1 VTH Config
 Room No.: Number of the room where the indoor monitor is installed.
 Device Type: There are two options: Master and Extension.
Master: If the indoor monitor that you are operating works as the master station, you need
to select Master.
Extension: If the indoor monitor works as an extension, you need to select Extension.
 Master IP: When the indoor monitor works as an extension, you need to enter IP address of the
master station.
 Master Name: Keep the default value.
 Master Pwd: The password you set during initialization (6 characters).
 System Version: You can view system version of the indoor monitor.
 Security Baseline Version: You can view security baseline version of the indoor monitor.
3.3.3.2 SIP Server
You need to enter SIP server information, and then video door phones in the same system can
communicate with each other.
SIP server (1)
Table 3-3 SIP server description
Parameter Description
Server IP
When the platform works as SIP server, server IP is IP address of the
management platform.
When a door station works as SIP server, server IP is IP address of the door
station.
Network Port
When the platform works as SIP server, network port is 5080.
When VTO works as SIP server, network port is 5060.
User Name Keep default value.