Quick Start Guide

10
VTO config (2)
2) Select Main or Sub.
Enter local IP, Network, gateway; select video standard, date format, time format; set
date and time.
3) Tap OK.
4) Tap One-key Config.
The VTO configuration will be completed in a few seconds.
3.3.1.2 Normal Configuration for VTH (For Apartment)
Tap Apartment on Figure 3-2.
Connect the indoor monitor to power source.
Enter the password, confirm password, and email.
 Password: The password is used when administrators need to go to the project mode.
 Email: The email is used when you need to reset the password.
Tap OK.