Quick Start Guide

9
Tap Edit behind each device to do configurations.
 Configure indoor monitor (VTH).
1) Select an indoor monitor (VTH).
VTH config
2) Enter local IP, Network, and gateway.
3) Tap OK.
The indoor monitor (VTH) configuration is completed.
 Configure Main VTO and Sub VTO. There must be only one main VTO and one or more
sub VTOs.
If there are no sub door stations (VTO), then you do not need to do sub door station
(VTO) configurations.
1) Select a door station (VTO).
VTO config (1)