Quick Start Guide

10
Initialize the devices
Tap One-key Config to finish the configuration of the VTO and VTH, as well as the SIP
server.
The status bar will suggest whether your configuration is successful.
Configuring Network Parameters
You can choose to connect to the network either through WLAN or LAN.
3.3.1 WLAN
Tap and hold Setting for about 3 seconds, and enter the password that you set for the
VTH.
Tap Network > WLAN.
Enable to see all the usable networks.
Before connecting to a Wi-Fi network, do either of the following first.
a) Tap WireLessIP, enter local IP, subnet mask and gateway that you plan for the
VTH, and then tap OK.
b) Tap WireLessIP, tap to enable the DHCP function to obtain IP
information automatically.
To enable the DHCP function, use a router with a DHCP function.
On the WLAN screen, tap the Wi-Fi name, and then enter password to connect to the
network.