Quick Start Guide

12
Enter Room No. (such as 9901 or 101#0) and tap OK to save.
⚫ Room No. shall be the same with VTH Short No., which is set when adding VTH
at web interface. Otherwise, it will fail to connect VTO.
⚫ If there is extension VTH, room No. shall end with #0. Otherwise, it will fail to
connect VTO.
⚫ Be used as an extension VTH.
1) Tap Master and the icon switches to Extension.
2) Enter room No. (such as 101#1) and master IP (IP address of master VTH).
Master name and master password are the user name and password of master
VTH. Default user name is admin, and the password is the one set during device
initialization.
Security module is On by default, keep the default status.
3) Tap OK to save settings.
Tap SIP Server.
The SIP Server interface is displayed, see Figure 2-16.
SIP server
1) Set parameters of SIP server by reference to Table 2-4.
Table 2-4 SIP server
Parameter
Description
Server IP
When the platform works as SIP server, server IP is IP address of
the platform.
When VTO works as SIP server, server IP is IP address of the
VTO.
Network Port
When the platform works as SIP server, network port is 5080.
When VTO works as SIP server, network port is 5060.
User Name
Use default value.
Register Pwd