Quick Start Guide

11
Wi-Fi list
2) Connect Wi-Fi.
The system has 2 access ways.
◇ On WLAN interface, select Wi-Fi, tap Wireless IP to enter local IP, subnet
mask, and gateway, and then tap OK.
◇ At WLAN interface, select Wi-Fi, tap Wireless IP, tap to enable
DHCP function and obtain IP info automatically.
To obtain IP info with DHCP function, use a router with DHCP function.
Tap VTH Config.
The VTH Config interface is displayed, see Figure 2-15.
VTH configuration
⚫ Be used as a master VTH.