Quick Start Guide

9
Parameter
Description
⚫ VTH room number consists of 1–6 numbers, letters, or
their combinations. It shall be consistent with room
number configured at VTH.
⚫ When there are master VTH and extensions, to realize
group call function, master VTH short no. shall end with
“#0”, whereas extension VTH short no. shall end with #1,
#2 and #3. For example, if master VTH is 101#0,
extensions will be 101#1, 101#2…
Register Type
Signaling interactive use in SIP system. Keep the default
value.
Modify
2.2.2 VTH Settings
Initialization
For first-time use, initialize the password and bind Email. Password is used to enter project
setting interface, while Email is used to retrieve your password when you forget it.
Power on the device.
The Welcome interface and Initialization interface will be displayed, see Figure 2-11.
Device initialization
Enter password, confirm password and email, and then tap OK.
Tap Setting for more than 6 seconds, enter the password set during initialization, and
click OK.
Tap Network.
The Network interface is displayed, see Figure 2-12 or Figure 2-13.