Quick Start Guide

8
VTO No. management
Click Add, set outdoor station parameters according to Table 2-2 and click OK. Repeat
this step to add other outdoor stations in the group.
Table 2-2 VTO No. management description
Parameter
Description
VTO No.
VTO number.
Register Password
Signaling interactive use in SIP system. Use default
value.
Build No.
Number of the building where VTO is located.
Unit No.
Number of the unit where VTO is located.
IP Address
IP address of VTO.
Username/Password
Username and password to log in to the web interface of
this VTO.
(Optional) Select Household Setting > Room No. Management.
Room No. Management interface is displayed, see Figure 2-10.
When there are master VTH and extension, both shall be added.
Room No. management
Click Add, set VTH parameters according to Table 2-3 and tap OK. Repeat these steps
to add other VTH in the group.
Table 2-3 Room No. management
Parameter
Description
Family Name
Set VTH username and nickname, in order to distinguish.
First Name
Nick Name
Room No.
Set VTH room number.