Quick Start Guide

Device initialization

Enter password and confirm password, and then click Next.

Select Email, and then enter your email address.

This email address is used to reset the password

Enter default address in the browser to log in to the web interface.

Default username is admin. Password is the new one set during initialization.

Select Network Setting > Basic.

The TCP/IP interface is displayed, see Figure 2-5.

TCP/IP

Enter the planned IP address, subnet mask and gateway, and then click OK.

After modification, VTO will restart automatically, while the following two cases occur on

the web interface.

⚫ If PC is in the planned network segment, web interface will go to new IP login

interface automatically.

⚫ If PC is not in the planned network segment, login will fail. Add PC to the planned

network segment and login to web interface again.

The Device Properties interface is displayed, see Figure 2-6.