Quick Start Guide

4
Desktop installation
Configuration
Before commissioning, check whether the following work has been completed.
⚫ Check whether there is short circuit or open circuit. Power on the device only after the
circuit is confirmed to be normal.
⚫ IP and No. of each VTO and VTH have been planned.
⚫ Know location of the SIP server.
⚫ Scan QR code on the cover for details.
Set VTO info and VTH info at Web interface of every VTO, set VTH info, network info and VTO
info on every VTH, and thus realize video intercom function.
2.2.1 VTO Settings
VTO interfaces of different models might be different, and the actual interface shall prevail.
If it is the first time that you use the VTO, initialize it and modify login password.
Ensure that default IP addresses of PC and VTO are in the same network segment. Default IP
address of VTO is 192.168.1.108.
Power on the device, and enter default IP address of VTO at the address bar of PC
browser.
The Device Init interface is displayed. See Figure 2-4.