Quick Start Guide
Table Of Contents
11
Project settings Figure 3-3
VTH Config
Room No.: No. of the room where the indoor monitor is installed.
Device Type: There are two options: Master and Extension.
Master: If the indoor monitor you are operating works as the master station, you need
to select Master.
Extension: If the indoor monitor works as an extension, you need to select Extension.
Master IP: When the indoor monitor works as an extension, you need to enter IP address
of the master station.
Master Name: Keep the default value.
Master Pwd: Keep the default value.
System Version: You can view system version of the indoor monitor.
Security Baseline Version: You can view security baseline version of the indoor monitor.
SIP Server
You need to enter SIP server information, and then the whole video door phone system can
communicate with each other.
Tap SIP Server, and then the SIP server interface is displayed.