User's Manual

54
Figure 7-8 Add device
Step 6 Configure the time zone, and then tap Done.
You have completed the device adding steps.
7.4 Configuring Arm and Disarm
Make sure that the VTH and VTO are properly connected.
Step 1 On the Home screen, tap , select the VTH you have just added, and then tap
Device Details to go to the function screen.
Step 2 Tap Disarm or Arm to disarm or arm the VTH.
Figure 7-9 Disarm VTO
Step 3 Select from the arm/disarm mode list, and the arm/disarm configuration would take