User's Manual

53
When there is a main VTH and extension(s), make sure that you scan only the QR
code of the main VTH.
Figure 7-7 Add VTH
The illustration is for reference only and might differ from the actual one.
Step 5 Configure device information. On the Add Device screen, enter the device name of
the VTH, username and password of the VTH, and then tap Save.
●
Device Name: customized.
●
Username: Enter user.
●
Password: Enter the network password of the VTH you configured in "6.5.6.1 User
Password"