User's Manual

31
Figure 6-16 Mode setting
Step 3 Select arm mode you want to configure in the tabs.
Step 4 Tap in every area to add it into arm mode.
Multiple areas can be added into one arm mode simultaneously, whereas one area
can be added into different modes.
6.5.4 General Setting
6.5.4.1 Time and DND
Set VTH system time, time zone and DST.
Parameters at this interface are set on main VTH only, and extension VTH synchronizes with
main VTH.
Step 1 Tap Setting.
Step 2 Select General > Time.