User's Manual

29
Paramete
r
Description
Status
●
Instant Alarm: After armed, if an
alarm is triggered, the device
produces siren at once and enters
alarm status.
●
Delay Alarm: After armed, if an
alarm is triggered, the device enters
alarm status after a specified time,
during which you can disarm and
cancel the alarm.
●
Bypass: Alarm will not be triggered
in the area. After disarmed, this area
will restore to normal working
status.
●
Remove: The area is invalid during
arm/disarm.
●
24 Hour: Alarm will be triggered all
the time in the area regardless of
arm or disarm.
A zone in Remove status cannot be
bypassed.
●
Instant Alarm: After armed, if
an alarm is triggered, the
device produces siren at once
and enters alarm status.
●
Delay Alarm: After armed, if
an alarm is triggered, the
device enters alarm status
after a specified time, during
which you can disarm and
cancel the alarm.
●
Bypass: Alarm will not be
triggered in the area. After
disarmed, this area will restore
to normal working status.
●
Remove: The area is invalid
during arm/disarm.
●
24 Hour: Alarm will be
triggered all the time in the
area regardless of arm or
disarm.
A zone in Remove status cannot
be bypassed.
Enter
Delay
After entering delay, when armed area
triggers an alarm, entering armed area
from non-armed area within the delay
time period will not lead to linkage
alarm. Linkage alarm will be produced if
delay time comes to an end and it is not
disarmed.
Delay is only valid to the areas of
Delay Alarm.
Exit Delay
After arm, Delay Alarm area will enter
arm status at the end of Exist Delay.
If multiple areas set the exit delay,
interface prompt will conform to
maximum delay time.
6.5.2.2 Alarm Output
After enabling alarm output, when other devices call this VTH, the alarm output device will