User's Manual

15
to the status ON. If you want to set your VTH address as 133, you need to do a more
complex calculation (128+4+1=133, which equals to the value of DIP 8, DIP 3 and DIP
1combined together in the mapping relation), and then manually move the actuator of DIP
8, DIP 3 and DIP 1 all to status of ON.
Here is the list of commonly used VTH addresses (1-20) and their corresponding DIP switch
number combinations.
Table 5-2 Common VTH Address (1-20) and DIP switch numbers
VTH
Address
DIP Switch Combination
Coding Rule
1
DIP 1
2
DIP 2
3
DIP 2+ DIP 1
4
DIP 3
5
DIP 3 + DIP 1
6
DIP 2 + DIP 3
7
DIP 3 + DIP 2 + DIP 1
8
DIP 4
9
DIP 4 + DIP 1
10
DIP 4 + DIP 2
11
DIP 4 + DIP 2+ DIP 1