User's Manual

Dahua Video Conference Terminal User’s Manual

The TV power button , signal source switch button and TV volume adjust button

can work normally after they are matched.

Take TV power button matching for example, the operation steps are as follows:

Step 1

Press button till the red indicator light is on and then release the button.

Step 2

Press button, the red indicator light flashes.

Step 3

Match the device remote control with TV remote control; please keep the distance between 1 and

3cm.

 If matching succeeds, then the red indicator light will flash three times and will be always on.

 If matching fails, then the red indicator light will flash slowly once and will be normally on.

Step 4

Press button, the red light is off. Save matching code value and exit matching mode.

Note:

If press button and there is no signal input after 10 seconds, then the red indicator light

will be off and it will exit matching mode automatically.