User's Manual

Dahua Video Conference Terminal User’s Manual
42
Step 3
Press the button of the remote control to send /close demo (optional).
6.4.2.2 Apply
The host meeting place has more control rights than the non-host meeting place.
Meeting place without host: You can apply to be host directly if there is no host in the meeting
place.
Meeting place with host: If there is host in the meeting place, then it needs to be agreed by the
current host when you apply for host.
Step 1
Select “Apply”.
Step 2
Press button to confirm.
6.4.2.3 Log
It is to check the relevant event information at each time point during the meeting.
Step 1
Select “More > Log”.
Step 2
Press button to confirm. The system displays the interface of “Log”, which is shown in
Figure 6-32.