User's Manual

Dahua Video Conference Terminal User’s Manual
11
4 Login
4.1 Explanation before Login
 Please make sure the device cable is correctly connected and turn on the monitor.
 Video terminal device supports three kinds of control operation which are remote control,
keyboard and mouse, take the control operation of remote control as an example.
 Press button to turn on/off the device.
 After the device is powered on, please press to switch the HDMI output channel of
monitor to implement meeting operation.
Note:
It can use button before it is matched successfully, otherwise, it becomes invalid. Please
refer to 1.3.2.2 for remote control button matching.
4.2 Common Button Description of Remote Control
The following button operation description is the common operation command of the device.
 Press button to select parameter.
 Press button to select confirm/OK.
 Press “number button” to input parameter information.
4.3 Interface Introduction
The interface is shown in Figure 4-1 after switching the HDMI output channel of the monitor.
Figure 4-1