Quick Start Guide

3
No.
Port
Description
2
Alarm IN1
Inputs signals from an alarm detection device such as a smoke
detector. When smoke detector is triggered, it makes sounds
and meanwhile transmits alarm signals to Camera for the
Camera to start the corresponding linkage such as Snapshot
and Send Email (see "5.1 Configuring Alarm Input and Output"
for details).
ALARM_NO
Connect ALARM_NO and ALARM_COM altogether to an alarm
sending device to deliver an alarm (alarm voice, for example).
ALARM_COM
GND
Ground terminal.
3
Audio OUT
Outputs audio information to a speaker. When the speaker is
used together with the sound pick-up, on the web interface you
can live chat with people near the speaker.
4
Audio IN
Inputs the analog audio signals (passengers’ voice in a railway
station, for example) from the sound pick-up.
5
RS-485
Use RS-485 cables and its converter to connect the Camera to
a computer. Then you can use computer to get the Camera
implement several tasks. Also, use RS-485 cables to connect
the Camera to another PTZ camera. Then the Camera will send
signals to and command another PTZ camera.
6
Power cords
DANGER
When connecting power cords to power adapter, ensure power
adapter is disconnected from the power source. Installing
Camera with power on might result in serious injury.
Inputs 12V DC voltage.
7
GND
Ground terminal.