Operation Manual

Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual
72
Parameter
Note
Enable
It is to enable time task function.
Task Action
It is to set the time task action, such as preset, tour, scan and pattern.
Auto Home
When call PTZ artificially and interrupt time task, it can auto restore the time
that time task needs.
Period Setting
It is to set the exact period of time task, click “setting” to set.
Copy to Task No
Click “Copy” to copy the well-set task information to the designated task
number.
4.4.1.9 PTZ Restart
PTZ restart interface is shown as below. See Figure 4-59.
Figure 4-59
Please refer to the following sheet for detailed information.
Parameter
Function
PTZ restart
It is to reboot PTZ.
4.4.1.10 Default
Default interface is shown as below. See Figure 4-60.