Operation Manual

Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual

Please refer to the following sheet for detailed information.

Parameter

Function

Enable

Check the box here to enable idle motion function.

Idle Motion

Here you can set preset, scan, pattern, tour.

Please note you need to set the corresponding

operation first if you want to use this function.

Idle time

Set idle time.

4.4.1.7 Power up

Power up interface is shown as below. See Figure 4-56.

Figure 4-56

Please refer to the following sheet for detailed information.

Parameter

Function

Enable

Check the box here to enable power up function.

Power up

Here you can set preset, scan, pattern, tour and auto.

Please note you need to set the corresponding

function first if you want to use it.

4.4.1.8 Time Task