Operation Manual

Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual
61
Figure 4-46
Parameter
Note
Enable
Check “Enable” to enable WIFI function.
Add SSID
After it is enables, click “Add SSID”, add network ID in the dialog box, then it
needs to click “Search SSID” to confirm if the network ID is available. It
means the network ID is available if it can search the hotspot of the wireless
network.
Search SSID
After it is enabled, click “Search SSID’, then it will display the wireless
network hotspot in the current environment for the network camera in the list,
double click one of the item to pop up the signal intensity and authentication
method, please enter password if necessary.
Note:
 Please keep the password index number same as that of the router when entering the password.
Please click “Connect” directly.
 The WIFI information column can display the name, state and IP info of the hotspot which is being
connected. Generally it needs some time to connect to WIFI hotspot according to the network
signal intensity, so generally it needs to click “Refresh” after it is reconnected, in this way the WIFI
work information column can guarantee the realtime display of working state.