Operation Manual

Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual

Parameter

Function

Scene

Please select corresponding scene to set parameter.

Detect balance

There are three modes: compromise mode, omission detect less and error detect

less.

Sensitivity

The level ranges from 1 to 10. The default setup is 5. The higher the sensitivity is,

the easier for the device to detect the low contrast object and small object. At the

same time, the error detect may become more.

Add detect

region

Click button , you can draw a detection zone.

Add excluded

region

Click button ，you can draw the privacy mask (shield) zone.

4.3 Network

4.3.1 TCP/IP

The TCP/IP interface is shown as in Figure 4-32. It supports IPv4 and IPv6. IPv4 supports static IP and

DHCP. IPv6 supports static IP only. When you manually modify IP address, WEB will automatically

jump to the new IP address.

Figure 4-32

Please refer to the following sheet for detailed information.