Operation Manual

Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual
34
Picture Overlay
 You can enable this function to display overlay picture.
Click disable to turn it off. See Figure 4-.
 Click Upload Picture to overlay local picture into monitoring
window. You can drag the yellow box to move it.
Note:
You cannot enable OSD and overlay at the same time.
Refresh
 Set channel title, time title, OSD info, picture overlay and
save the change. You can click Refresh to see effect.
4.1.2.4 ROI
Figure 4-18
parameter
Note
Enable
Check “Enable” to display ROI in the video monitoring window; check “Disable”
not to display.
Image
Quality
It is to set the image quality of the ROI, it ranges from 1~6.
4.1.2.5 Path
The storage path interface is shown as in Figure 4-17.
Here you can set snap image saved path and the record storage path.
 The default monitor image path is C:\Documents and
Settings\Administrator\WebDownload\LivePicture.