Operation Manual

Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual

Figure 4-11

Please refer to the following sheet for detailed information.

Parameter

Function

Sub Stream Enable

Please check the box here to enable extra stream

function.

This function is enabled by default.

Code-Stream Type

ACF means using different fps to record.

There are two options: VBR and CBR.

Please note, you can set video quality in VBR mode.

Encode mode

There are three options: H.264, H.264B, H.264H and

MJPEG encode.

 H.264: Main Profile encode mode.

 H.264B: Baseline Profile encode mode.

 H.264H: High Profile encode mode.

 MJPEG: In this encode mode, the video needs

large bit stream to guarantee the video definition.

You can use the max bit stream value in the

recommend bit to get the better video output effect.

Resolution

There are multiple resolutions. You can select from the

dropdown list.

For each resolution, the recommended bit stream value

is different.

Frame Rate

PAL: 1～25f/s，NTSC: 1～30f/s..

The frame rate may vary due to different resolutions.