Operation Manual

Dahua 2 Inch PTZ Camera Web 3.0 Operation Manual
11
Figure 2-9
Please refer to the following sheet for PTZ setup information.
Parameter
Function
Scan
 Select Scan from the dropdown list, click Start button, you can
begin scan operation. Default SN is 1.
Preset
 Input the preset value and then click View button, the camera
turns to the corresponding position of the preset.
Tour
 Select Tour from the dropdown list and then click Start button,
you can begin tour.
Pattern
 You can select Pattern from the dropdown list and then click
Start button to begin PTZ movement.
Assistant
 Reserved assistant function.
Go to
 It is the accurate positioning function. Please input
corresponding horizontal angle, tilt angle, and speed dome
zoom speed and then click Goto button to go to a specified
position.
 One unit of the horizontal angle or tile angle stands for 0.1
degree.
For detailed setup information, please go to Setup->PTZ->Function.
Click button to begin a PTZ operation. Now you can see it becomes Stop button. Click it
again to stop current PTZ operation.