Installation Manual
Table Of Contents
- Regulatory Information
- Foreword
- Important Safeguards and Warnings
- 1 Structure
- 2 Install the Camera
- Appendix 1 Thunder-Proof and Surge Protection
- Appendix 2 RS-485 Cable
- Appendix 3 Relationship between Cable Diameter (12V DC) and Transmission Distance
- Appendix 4 Wire Gauge Reference Sheet
- Appendix 5 Cybersecurity Recommendations
Important Safeguards and Warnings VI
Install the camera at places with good condition of ventilation and cooling.
Do not aim the lens directly at intense light like the sun, illuminators; otherwise the lens will
be damaged.
Cleanning
Use soft cloth that moistened with cleaning solution to clean the camera, and then dry the
camera. Do not use gasoline, paint diluent, or other chemicals to clean the camera;
otherwise deformation and paint peeling might occur.
Read all the manuals included before you use chemical cloth. Do not let the housing of the
camera be in contact with plastic or rubber materials for too long; otherwise damage to the
housing or peeling paint will occur.