Installation Manual
Table Of Contents
- Regulatory Information
- Foreword
- Important Safeguards and Warnings
- 1 Structure
- 2 Install the Camera
- Appendix 1 Thunder-Proof and Surge Protection
- Appendix 2 RS-485 Cable
- Appendix 3 Relationship between Cable Diameter (12V DC) and Transmission Distance
- Appendix 4 Wire Gauge Reference Sheet
- Appendix 5 Cybersecurity Recommendations
7
2 Install the Camera
Check before Installation
Make sure that the place where the camera is installed has enough space to hold the
camera and its mounting accessories.
Make sure that the bracket and wall where the camera is installed have the capacity to
bear eight times the weight of the speed and its accessories.
Make sure the wall is thick enough to allow bolts to be installed.
If the camera is laser camera, the installation height should be above 6 meters.
Sticker
There is a sticker in the package. The sticker helps you drill cable entries and srew holes at
right places in the wall or ceiling.
When pasting stickers, make the arrow in the sticker face downwards; otherwise the camera
might be damaged.
Sticker
Table 2-1 Description of the sticker
No. Description
1 Cable entry
2 Screw hole