Quick Start Guide

Quick Start Guide
2
Table 1-1 Indicator light description
No.
Name
Description
1
Status
indicator light
Solid green: Radar is running normally.
Flashing red: Alarm events occur in the detection range of
Radar.
2
Power
indicator light
Solid green: Radar is running normally.
Flashing green: Radar is upgrading.
3
Network
indicator light
Solid yellow: Network is connected.
Off: Network is not connected.
1.2.2 Reset Button and Memory Card
Open the rear cover of the Radar with a screwdriver. The reset button and memory card slot are
displayed.
Reset button and memory card
Table 1-2 Reset button and memory card
No.
Name
No.
Name
1
Memory card slot
2
Reset button
1.2.2.1 Using the Reset Button
You can use the reset button to restore the Radar to factory default settings.
When the Radar is running normally, open the rear cover of the Radar. Then press and hold the
reset button for over 15 s, and the Radar will be restored.