Quick Start Guide

Quick Start Guide
21
4.1.2 Manual Calibration
To configure the manual calibration:
In the calibration mode drop-down list, select Manual.
Click Start Calibration.
Adjust the position of the bounding box through the directional buttons and speed on
the right side of the live view, so that the position of the box is basically synchronized
with the position of the moving person or car.
Manual calibration
Click Stop Calibration to save the settings.
Adjusting Radar Direction
Device Attitude is enabled by default. When the direction of the Radar needs to be adjusted
after the installation, you can enable the device attitude function to check whether the
equipment is installed properly.
To enable the device attitude:
In the web client of the Radar, select Setting > Radar Settings > Device Attitude.
Select Enable.