Quick Start Guide
Table Of Contents
Quick Start Guide
20
4 Quick Operation
Configuring Calibration
To raise the detecting accuracy, we recommend configuring calibration of a moving person or
object within the Radar detection range.
4.1.1 Auto Calibration
To configure the auto calibration:
Enable device attitude in Setting > Radar Settings > Device Attitude.
Select Setting > Radar Settings > Linkage.
In the calibration mode drop-down list, select Auto.
In the live view interface, confirm whether the target position corresponds to the
bounding box. You can configure the calibration manually if the auto effect is
unsatisfactory.
Auto calibration