Quick Start Guide

Quick Start Guide
5
2 Installation
Installation Preparations
2.1.1 Environmental Requirements
 The installation site has enough space to install the Radar and its mounting components.
 The wall and pole for installation can sustain eight times the weight of the Radar and its
mounting components.
 For wall mount, the wall shall be thick enough to install expansion bolts.
 No large areas of metals or glass objects are within the Radar detection range; otherwise
mirrored alarm sites might occur. If the metal or glass object cannot be removed, do not let
it face the front side of the Radar during installation. Because radar electromagnetic wave
cannot penetrate objects such as buildings, rocks, and glasses, a blind zone might be
formed behind these objects.
 No weed and swaying branch exists within the Radar detection range, and trim regularly if
any.
 No interference devices with strong electromagnetic or periodically rotating objects are
near the Radar installation location or within its detection range, such as outdoor air
conditioners and wind-driven generators.
 Make sure that the Radar is installed securely and stably. Swaying will reduce its detection
precision, or cause misinformation which influences the normal usage of radar.
2.1.2 Installation Tools and Cables
Except for the accessories provided, you need to prepare the following tools and cables before
installation: Power cord, lightning protector, distribution box, air switch, PoE switch (optional),
electric screwdriver, network cable, ladder, insulating gloves, and other things as needed.
Detection Range
Horizontal Direction
Make sure that the front side of the Radar faces the central part of the detection area.