User's Manual

85
 System: Include program launching, force exit, exit, program restarting, device
turn off/restarting, system restarting, and system upgrade.
 Setting: Include save configuration and delete configuration files.
 Data: Include configuring disk type, erasing data, hot swap, FTP status, and
record mode.
 Event (Record events such as video detection, smart plan, alarm, and
abnormality): Include event start and event end.
 Record: Include file access, file access error, and file search.
 Account: Include login, logout, add user, delete user, modify user, add group,
delete group, and modify group.
 Safety: Include safety related information such as password reset and IP filter.
Click Search. Step 3
The needed logs are displayed.
 Click a certain log, and then you can view the detailed information in Detailed
Information area.
 Click Backup, and then you can back up all the found logs to your PC.
 Click Clear to clear all logs.
4.6.3 Remote Log
You can upload the log information to the log server.
Select Setting > Information > Log > Remote Log. Step 1
The Remote Log interface is displayed. See Figure 4-82.
Remote log Figure 4-82
Select Enable check box to enable the remote log function. Step 2
Set the IP address, port, and device number as needed. Step 3
Click Save. Step 4
You can click Default to restore the settings.
4.6.4 Online User
You can view username, user local group, IP address, and user login time of the online users.
Select Setting > Information > Online User.