User's Manual

79
Import successfully Figure 4-72
 If you select Install Signed Certificate, follow the steps below.
Select Setting > System > Security > HTTPS. 1)
The HTTPS interface is displayed.
Click Browse to select signed certificate path and certificate key path, and then click 2)
Upload.
Install root certificate. See the previous steps in creating certificate. 3)
Select Enable HTTPs, and then click Save. Step 2
The Reboot interface is displayed. See Figure 4-73.
Reboot the radar Figure 4-73
If HTTPS is enabled, you cannot access the radar through HTTP. It will switch to HTTPS
automatically.
4.5.6 Firewall
You can configure network access, refuse PING request, and prevent Semijoin to enhance network
and data security.
 Network Access: Set trusted list and banned list to limit access permission.
Trust List: Only the IP/MAC addresses in the list can access the selected port of the radar. 
Banned List: The IP/MAC addresses in the list cannot access the selected port of the radar. 
 PING Prohibited: By enabling PING Prohibited function, the radar will not response to the
ping request.
 Prevent Semijoin: By enabling Prevent Semijoin function, the radar can provide service
normally under Semijoin attack.
 You cannot add IP/MAC address of the radar to the trusted or banned list.
 You cannot set port number when MAC address is added to the trusted or banned list.
 When the IP addresses of the radar and your PC are in the same LAN, MAC verification takes
effect.
 When you access the radar through Internet, MAC address verifies according to the router
MAC.
This section takes Network Access as an example.