User's Manual

73
4.5.5.2 System Service
You can configure system services and ensure system security.
Select Setting > System > Safety > System Service. Step 1
The System Service interface is displayed. See Figure 4-63.
System service Figure 4-63
Configure system service parameters. See Table 4-28. Step 2
Table 4-28 System service parameter descriptions
Function
Description
SSH
Disabled by default. You can enable SSH authentication to perform safety
management.
Multicast/Broadcast
Search
Enabled by default. When multiple users watch the live video
simultaneously through network, they can find your device with multicast
or broadcast protocol.
Password Reset
Enabled by default. You can reset the password if you forget the
password.
If you disable the function, you can only restore the device to default
settings through hardware and then reset the password.
CGI Service
Enabled by default, and the radar can be accessed through these
protocols.
Onvif Service
Genetec Service
Audio and Video
Transmission
Encryption
Enable the function to encrypt audio and video transmission.
 Make sure that matched device or software supports video
decryption.
 Encryption function is not supported when transmitting audio and
video date between the radar and the third party platform and device.
To ensure data security, we recommend you to disable CGI service,
Onvif service, and Genetec service.