User's Manual

66
Parameter
Description
DST
Enable DST as needed.
Select the check box, and then configure start time and end time of DST with
Date or Week.
NTP
Select NTP check box to enable NTP function and the system will sync time to
the Internet server.
Server
Set the address of time server.
Port
Set the port of time server.
Interval
Set the sync interval between the radar and the time server.
Click Save. Step 3
4.5.3 Account
You can add, delete, or modify users and groups. Managing users and groups are only available for
administrator users.
 The maximum length of the user or group name is 15 characters. A user name can only consist
of numbers, letters, underline, dot and @. A group name can only consist of numbers, letters,
and underline.
 The password must consist of 8 to 32 non-blank characters and contain at least two types of
characters among upper case, lower case, number, and special character (excluding ' " ; : &).
Follow the password security notice to set a high security level password. Make sure that the
new password and the confirmed password are the same.
 You can have 18 users and 8 groups at most according to factory settings.
 You can manage users in two methods: Single user or group. Duplicate usernames or group
names are not allowed. A user can be in only one group at a time.
 Online users cannot modify their own authority.
 There is one admin by default which has the highest authority.
4.5.3.1 User
You are admin user by default. You can add users, delete added users, modify user password, and
log in anonymously.
Select Setting > System > Account > Account > Username. The Username interface is displayed.
See Figure 4-55.