User's Manual

64
Table 4-25 Record control parameter descriptions
Parameter
Description
Pack
Duration
Set the pack duration of each record; it is 30 min by default.
Pre-event
Record
The time period for which the system records video before alarm starts. If the
value is 5, then the system records video for 5 s before alarm starts and then save it
to the record.
If the Record Mode is Off, and the record is triggered by an alarm event, the
system will save n seconds (the duration set in Pre-event Record) of the video,
which starts before enabling recording, into the whole record.
Disk Full
Set the record method when the disk is full. You can select from:
Stop: The system stops recording when the disk is full.

Overwrite: The system overwrites the oldest files and keeps recording when

the disk is full.
Record Mode
Manual: The system starts recording video manually.

Auto: The system records video as time period scheduled.

Off: The system will not record video or take snapshots.

Record
Stream
Include main stream and sub stream.
Click Save. Step 3
System 4.5
This chapter introduces system configurations, including general settings, date & time, account,
safety, default, import and export configurations, auto maintenance, and upgrade.
4.5.1 General
You can configure radar name, system language and video format.
Select Setting > System > General > General. Step 1
The General interface is displayed, see Figure 4-53.
General Figure 4-53
Configure General parameters. See Table 4-26. Step 2