User's Manual

63
NAS Figure 4-51
Configure NAS parameters. See Table 4-24. Step 2
Table 4-24 NAS parameter descriptions
Parameter
Description
Enable
Select Enable check box to enable NFS or SMB function.
NFS (Network File System): A file system which enables computers in the
same network share files through TCP/IP.
SMB (Server Message Block): Provide shared access for clients and the
server.
Server Address
The IP address of the NAS server.
Remote
Directory
The destination path in the NAS server.
Click Save. Step 3
4.4.3 Record Control
This section introduces record control configurations, including pack duration, pre-event record,
disk full, record mode, and record stream.
Select Setting > Storage > Record Control. Step 1
The Record Control interface is displayed. See Figure 4-52.
Record control Figure 4-52
Configure record control parameters. See Table 4-25.Step 2