User's Manual

62
FTP Figure 4-50
Select Enable check box to enable the FTP function. Step 2
SFTP is recommended to enhance network security.
Configure FTP parameters. See Table 4-23. Step 3
Table 4-23 FTP parameter descriptions
Parameter
Description
Server Address
The IP address of the FTP server.
Port
The port number of the FTP server.
Username
The username to log in to the FTP server.
Password
The password to log in to the FTP server.
Remote Directory
The destination path in the FTP server.
Emergency (Local)
Select Emergency (Local), and when the FTP server fails, all the files are
saved to the internal SD card.
Click Test to test if FTP server can be connected to radar. Step 4
Click Save. Step 5
4.4.2.4 NAS
NAS function can be enabled only when the storage path is selected as NAS.
Select Setting > Storage > Destination > NAS. Step 1
The NAS interface is displayed. See Figure 4-51.