User's Manual

61
Select the storage path for the records and snapshots of different event types as needed. Step 2
For detailed parameter descriptions, see Table 4-22.
Table 4-22 Path parameter descriptions
Parameter
Description
Event Type
Select from Scheduled and Alarm. It matches with the record types on the
schedule interface.
Local
Save in the internal SD card.
FTP
Save in the FTP server.
NAS
Save in the NAS (network Attached Storage).
Click Save. Step 3
4.4.2.2 Local
Display the internal SD card information. You can set it as read only or read & write; you can also hot
swap or refresh it.
Select Setting > Storage > Destination > Local, and then the Local interface is displayed. See
Figure 4-49.
 Click Read Only, and then the SD card is set to read only.
 Click Read & Write, and then the SD card is set to read & write.
 Click Hot Swap to realize hot swap upon the SD card.
 Click Refresh, and then you can format the SD card.
Local Figure 4-49
4.4.2.3 FTP
When the network fails or is disconnected, you can save all the files to the internal SD card for
emergency.
FTP function can be enabled only when the storage path is selected as FTP.
Select Setting > Storage > Destination > FTP. Step 1
The FTP interface is displayed. See Figure 4-50.