User's Manual

54
Parameter
Description
Record
By selecting Record, the system will record automatically when the alarm is
triggered.
Before enabling this function, you need to configure record period in Setting >
Storage > Schedule > Record. For details, see "4.4.1.1 Record Schedule." In
Setting > Storage > Record Control, select Auto for the Record Mode.
Record Delay
The alarm record keeps running for the defined time (from 10 s to 300 s) after the
alarm is ended.
Relay-out
By selecting Relay-out, the corresponding alarm output device will be linked
through alarm output port when the alarm is triggered.
Alarm Delay
The alarm keeps running for the defined time (from 10 s to 300 s) after the alarm is
ended.
Send Email
By selecting Send Email, the system automatically sends email to the specified
mailbox when the alarm is triggered. You can configure the mailbox in Setting >
Network > SMTP (Email). For details, see " 4.2.7 SNMP."
Snapshot
By selecting Snapshot, the system automatically captures images when the alarm
is triggered.
Before enabling this function, you need to configure record period in Setting >
Storage > Schedule > Snapshot. For tetails, see "4.4.1.2 Snapshot Schedule."
Click Save. Step 3
4.3.2 Abnormality
You can set the linkage actions when abnormal events are triggered covering SD card, network,
illegal access, and scene changing.
4.3.2.1 SD Card
When any abnormality happens to the SD card, the alarm will be triggered.
Select Setting > Event > Abnormality > SD Card. Step 1
The SD Card interface is displayed. See Figure 4-39.
SD card Figure 4-39
Configure parameters as needed. For details, see Table 4-19. Step 2