User's Manual

52
ONVIF Figure 4-36
Select On. Step 2
Click Save. Step 3
Event Management 4.3
You can enable external and abnormality alarms, and configure linked actions such as recording,
capturing, and sending email, and so on.
4.3.1 Alarm
You can set the linkage actions when alarm events are triggered.
Select Setting > Event > Alarm. Step 1
The Alarm interface is displayed. See Figure 4-37.
Alarm linkage Figure 4-37
Select Enable check box to enable the alarm linkage, and configure parameters as needed. Step 2
Configure arming period.
Click Setting. 1)
The Period interface is displayed. See Figure 4-38.