User's Manual

51
Click Save. Step 3
4.2.12 Access Platform
4.2.12.1 P2P
P2P (peer-to-peer) is a private network traversal technology which enables user to manage devices
easily without requiring DDNS, port mapping or transit server.
Scan the QR code with your smartphone, and then you can add and manage devices on your mobile
client.
Select Setting > Network >Access Platform > P2P. Step 1
The P2P interface is displayed. See Figure 4-35.
P2P Figure 4-35
P2P is enabled by default. When P2P is enabled, the radar will be connected to the network,
and the status is displayed as online. We might collect the information including IP address,
MAC address, device name, device SN and so on. The information collected is for remote
accessing only. Clear Enable check box if you do not agree with our information collection.
Log in to mobile phone client, and then tap the cross icon at the upper-right corner of the Step 2
app on the Device interface.
Scan the QR code on the P2P interface. Step 3
Follow on-screen instructions to finish the configurations. Step 4
4.2.12.2 ONVIF
The ONVIF (Open Network Video Interface Forum) allows the network video products (including
video recording device and other recording devices) from different manufacturers to mutually
communicate with each other.
ONVIF is on by default.
Select Setting > Network > Access Platform > ONVIF. Step 1
The ONVIF interface is displayed. See Figure 4-36.