User's Manual

48
Parameter
Description
Read-only Username
The name is public by default.
You can enter number, letter, and underline to form the name.
Read & write Username
The name is private by default.
You can enter number, letter, and underline to form the name.
Authentication Type
You can select from MD5 and SHA. The default type is MD5.
Authentication
Password
It should be no less than 8 digits.
Encryption Type
The default is CBC-DES.
Encryption Password
It should be no less than 8 digits.
Click Save. Step 3
View radar information. Step 4
Run MIB Builder and MG-SOFT MIB Browser. 1)
Compile the two MIB files with MIB Builder. 1)
Load the generated modules with MG-SOFT MIB Browser. 2)
Enter the IP address of the device you need to manage in the MG-SOFT MIB Browser, 3)
and then select version to search.
Unfold all the tree lists displayed in the MG-SOFT MIB Browser, and then you can view 4)
the configuration information such as video channel and software version.
Use PC with Windows operating system and disable SNMP Trap service. The MG-SOFT
MIB Browser will display prompt when alarm is triggered.
4.2.8 Bonjour
Bonjour, known as zero-configuration networking, can automatically discover the PC, device and
service on the IP network. With Bonjour, the radar can discover each other automatically without
entering IP address or configuring DNS server.
After Bonjour function is enabled, your device will be automatically detected in the operating
system and client which support Bonjour. When the radar is automatically detected by Bonjour, it
will display the server name which is configured by the user.
Select Setting > Network > Bonjour. Step 1
The Bonjour interface is displayed. See Figure 4-31.
Bonjour Figure 4-31
Select Enable, and then configure server name. Step 2
Click Save. Step 3