User's Manual

46
UPnP Figure 4-28
Select Enable to enable UPnP function, and there are two mapping modes: Custom and Step 2
Default.
 Select Custom, and then you can modify external port as needed.
 Select Default, and then the system finishes mapping with available port
automatically. You cannot modify mapping relation.
Select Start Device Discover as needed. Step 3
Click Save to make the configurations valid. Step 4
4.2.7 SNMP
Simple Network Management Protocol, which can be used to enable software such as MIB Builder
and MG-SOFT MIB Browser to connect to the radar and manage and monitor your device.
 Install SNMP monitoring and managing tools such as MIB Builder and MG-SOFT MIB Browser.
 Contact technical support for the MIB file that matches the current version.
Select Setting > Network > SNMP. Step 1
The SNMP interface is displayed, see Figure 4-29 and Figure 4-30.
SNMP (1) Figure 4-29