User's Manual

28
Add PTZ camera Figure 4-10
Click Add PTZ Camera. Step 2
Add PTZ camera Figure 4-11
Enter IP address, port, camera name, type, username, and password. Step 3
Port is set to 80 by default. Keep the port consistent with the PTZ camera.
Click Save. Step 4
Switch to to enable alarm track linkage between the radar and the selected
camera.
4.1.3 Linkage
You can import a map, and set linkage between the radar and the added cameras after finishing
radar positioning and calibration.
Importing a Map
Select Setting > Radar Settings > Linkage. Step 1